Jinghui Industry Limited
Jinghui Industry Limited
Add to Cart
Zirconia (ZrO2) is an extraordinary refractory technical ceramic material. It possesses excellent chemical inertness and corrosion resistance at temperatures up to 2200℃, well above the melting point of alumina. Zirconia is stabilized in the cubic crystal structure to avoid cracking and mechanical weakening during heating and cooling. So it's easier to proceed with high precision processing. In addition to their refractoriness, they offer low thermal conductivity and are electrical conductors above 800 ℃. They also possess the unique ability to allow oxygen ions to move freely through the crystal structure above 600 ℃.
Zirconia ceramic bushes have the advantages of super hardness, high wear-resisting, good corrosion resistance, high-temperature tolerance, high strength, high mechanical strength, good chemical stability, polishing surface and so on.
1. High precision dimensions, it can fit with other parts perfectly
2. Higher density than most of technical ceramics, over than 6 g/cm3
3. Excellent wear resistance, much higher 276 times than stainless steel
4. High hardness, over than 1300 MPa for Vicker
5. Can withstand higher temperatures up to 2400°
6. Low thermal conductivity, less than 3 W/m.k at room temperature
7. Similar coefficient of thermal expansion as stainless steel
8. Exceptional fracture toughness reaches up to 8 Mpa m1/2
9. Corrosion resistance, withstand strong acid and alkali in high-temperature conditions
10. Resistance to molten metals due to an extraordinary melting point
| Material available | Zirconia (ZrO2), Alumina(Al2O3), Silicon carbide(SiO2), Silicon nitride(Si3N4) |
| Forming methods | Dry pressed, Ceramic injection molding, Hot pressed, ISO pressed |
| Available types | Flanged tubes, slotted tubes, one-end closed tubes, square tubes |
| Specification | OD can be from 1 to 50mm, length can be from 10mm to 500mm |
| Precision processing | CNC machining, Precision grinding, Polishing, Lapping, |
| Tolerance | The tolerance of OD and ID can be 0.001mm, the tolerance of length can be 0.001mm |
| Surface quality | Free of cracks, foreign contamination, mirror surface better than Ra0.1 |
| Key parameters | Roughness to be 0.02mm, Parallelism to be 0.001mm |
We produce various zirconia ceramic components in different materials with a special design.
Datasheet of Technical ceramics
| Property | Units | Material | ||||
| 99.5% alumina | 99%alumina | 95% alumina | ZrO2 (Y-TZP) | ZrO2 (TTZ) | ||
| Density | g/cm3 | ≥3.85 | ≥3.80 | ≥3.60 | ≥5.95 | ≥5.72 |
| Water absorption | % | 0 | 0 | 0 | 0 | 0 |
| Hardness | HV | 1700 | 1700 | 1500 | 1300 | 900 |
| Flexural strength | Mpa | ≥379 | ≥338 | ≥320 | ≥1200 | ≥1200 |
| Compressive strength | Mpa | ≥2240 | ≥2240 | ≥2000 | ≥1990 | 1750 |
| Fracture toughness | Mpa m1/2 | 4-5 | 4-5 | 3-4 | 6.5-8 | 11 |
| Max. service temperature | ℃ | 1675 | 1600 | 1450 | 1000 | |
| CTE | 1×10 -6 /℃ | 6.5~8.0 | 6.2~8.0 | 5.0~8.0 | 8.0~9.5 | 10.2 |
| Thermal shock | T(℃) | ≥250 | ≥200 | ≥220 | ≥300 | 350 |
| Thermal conductivity(25℃) | W/m.k | 30 | 29 | 24 | 3 | 3 |
| Volume resistivity | ohm.cm | |||||
| 25℃ | ＞1 x 10 14 | ＞1 x 10 14 | ＞1 x 10 14 | ＞1 x 10 11 | ＞1 x 10 11 | |
| 300℃ | 1 x 10 12 | 8 x 10 11 | 10 12 -10 13 | 1 x 10 10 | 1 x 10 10 | |
| 500℃ | 5 x 10 10 | 2 x 10 9 | 1 x 10 9 | 1 x 10 6 | 1 x 10 6 | |
| Insulation strength | KV/mm | 19 | 18 | 18 | 17 | 20 |
| Dielectric constant(1Mhz) | (E) | 9.7 | 9.5 | 9.5 | 29 | 28 |
We have in-housing comprehensive manufacturing types of equipment, including forming, sintering, CNC machining,
precision grinding, laser cutting and so on, it helps us to control the quality very well, also it greatly benefits cost control.
1. We will keep the ceramic parts inside the inner package to be fixed without moving, then it will prevent them from collision each other,
to avoid any cause any chippings during transportation.
2. In addition, the inside of the outer carton will be filled with sufficient protective kinds of stuff.
★ 10+ Years of manufacturing experience in OEM, ODM ★ Powerful R&D, mass production capability
★ In-house comprehensive manufacturing types of equipment ★ Rigorous quality control system and processes
★ Surpassing pre-sales and after-sales service ★ Abide all orders as the first priority
Q1. Are you a factory or trading company?
A: We are a manufacturer. You are welcome to visit our factory.
Q2: Do you send a sample to check?
A: Sure, the sample is free and freight collect.
Q3: When will you ship it?
A: If the products are in storage, we'll ship within 48 hours
Q4: When can I get the price?
A: We regularly quote within 24 hours after we get your inquiry. If you are in urgent need of getting the price.
Please call us or tell us in your email so that we will proceed with your inquiry as a priority.
Q5: Is it available to provide customized products?
A: We always support custom-made demand as per different materials, dimensions, and designs.
Q6: How to ensure quality?
A: The dimension out of any batch will be carried out sampling inspection per international AQL standard. A 100% cosmetic inspection will be done.
Q7: What other products are you dealing with?
A: We focus on a variety of ceramic tubes, ceramic substrates, ceramic sheets, textile ceramics besides metalized ceramics.