Jinghui Industry Limited
Jinghui Industry Limited
Add to Cart
1. Great mechanical properties, hardness, compressive and flexural strength are much higher stainless steel
2. High precision dimensional tolerance with diamond polished surface quality
3. Extreme wear and abrasion resistance., over 276 times in comparison with stainless steel
4. Extraordinary electrical insulation, it always us in many high voltage, high-current application
5. Chemical corrosion resistance under high temperature, even if with strong acid or alkali
6. Protective atmospheres or high vacuum at high-temperature to eliminate contamination or impurity.
7. Extreme high-temperature stability under reducing, inert, and high-vacuum conditions under high temperature up to 1800°C.
8. Low material cost in high-level applications than other technical ceramics
| Material | alumina, zirconia, silicon nitride, steatite optional | ||
| Side-length | 50mm x 50mm | ||
| Length | 10~ 800mm | ||
| Flatness | 0.001mm | Parallelism | To be 0.001mm |
| Surface treatment | Polished | ||
| Cosmetic | Smooth surface without no contamination, deformation, and crack | ||
| Property | Units | Materials | ||||
| 99.5%Al2O3 | 99%Al2O3 | 95%Al2O3 | ZrO2 | Si3N4 | ||
| Density | g/cm3 | ≥3.85 | ≥3.80 | ≥3.60 | ≥6.0 | ≥3.2 |
| Water absorption | % | 0 | 0 | 0 | 0 | 0 |
| Hardness | HV | 1700 | 1700 | 1500 | 1300 | 1550 |
| Flexural strength | Mpa | ≥379 | ≥338 | ≥320 | ≥1200 | ≥600 |
| Compressive strength | Mpa | ≥2240 | ≥2240 | ≥2000 | ≥1990 | ≥2500 |
| Fracture toughness | Mpa m1/2 | 4-5 | 4-5 | 3-4 | 6.5-8 | 6 |
| Max. service temperature (Non-loading) | ℃ | 1675 | 1600 | 1500 | 1000 | 1200 |
| CTE (20-800℃) | 1×10 -6 /℃ | 6.5~8.0 | 6.2~8.0 | 5.0~8.0 | 8.0~9.5 | 3.1 |
| Thermal shock | T(℃) | ≥250 | ≥200 | ≥220 | ≥300 | ≤1000 |
| Thermal conductivity(25℃) | W/m.k | 30 | 29 | 24 | 3 | 15~20 |
| Volume resistivity (25℃ ) | ohm.cm | ＞1 x 10 14 | ＞1 x 10 14 | ＞1 x 10 14 | ＞1 x 10 11 | ＞1 x 10 12 |
| Insulation strength | KV/mm | 19 | 18 | 18 | 17 | |
| Dielectric constant(1Mhz) | (E) | 9.7 | 9.5 | 9.5 | 29 | |
1. We will keep the ceramic parts inside the inner package to be fixed without moving, then it will prevent them from collsion each other, to avoid any cause any chippings during transportation.
2. In addition, the inside of the outer carton will be filled with sufficient protective kinds of stuff.
Q1. Are you a factory or trading company?
A: We are a manufacturer. You are welcome to visit our factory.
Q2: Do you send a sample to check?
A: Sure, the sample is free and freight collect.
Q3: When will you ship it?
A: If the products are in storage, we'll ship within 48 hours
Q4: When can I get the price?
A: We regularly quote within 24 hours after we get your inquiry. If you are in urgent need of getting the price.
Please call us or tell us in your email so that we will proceed with your inquiry as a priority.
Q5: Is it available to provide customized products?
A: We always support custom-made demand as per different materials, dimensions, and designs.
Q6: How to ensure quality?
A: The dimension out of any batch will be carried out sampling inspection per international AQL standard. A 100% cosmetic inspection will be done.
Q7: What other products are you dealing with?
A: We focus on a variety of ceramic tubes, ceramic substrates, ceramic sheets, textile ceramics besides metalized ceramics.